Hear from Our Customers
You’re not looking for a fancy system. You need to know who walked through your door at 6:47 PM last Tuesday. You need the ability to revoke access for that contractor the moment their job ends, not three weeks later when you finally track down their key card.
That’s what a properly installed access control system does. It gives you a digital record of every entry. It lets you grant or remove access from your phone while you’re sitting in traffic on I-476. It eliminates the nightmare of rekeying locks every time an employee leaves or a key goes missing.
Most Rose Valley businesses we work with are dealing with the same problem: they’ve outgrown their old key system, but they’re not sure what comes next. The answer isn’t complicated. You get door access control systems that actually match how your business operates today, not how it operated in 1995. You get the ability to manage everything from one place. You stop worrying about who made copies of what.
We’ve been handling security in Delaware County since the late 1800s. We’re not a van with a phone number. We’re a family operation with an actual storefront in Prospect Park, real inventory, and technicians who’ve been trained by people who’ve been doing this work since before electronic access control even existed.
Tom McCausland and his daughter Chrissy run the operation now. Every technician on our team is a member of the American Locksmith Association of Pennsylvania. We’re the largest locksmith company in the Delaware Valley because we’ve spent over 140 years not screwing people over.
Rose Valley businesses call us because we don’t play pricing games, we don’t upsell systems you don’t need, and we don’t disappear after installation. You’re getting someone who knows what they’re doing, and who’ll be here when you need adjustments six months from now.
First, we come look at your building. Not to sell you anything, but to understand what you actually need. How many entry points matter? Who needs access to what? Are you trying to secure one door or manage a whole facility? We ask questions that matter because the wrong system costs you money twice—once to install it, and again to replace it.
Once we know what you’re dealing with, we recommend a system that fits. Could be card readers. Could be keypads. Could be mobile credentials if your team already lives on their phones. We install commercial access control systems that match your business, not our inventory.
Installation happens on your schedule. We mount the hardware, run the wiring, set up your software, and test every single entry point. Then we show you how to use it. How to add users. How to pull reports. How to lock someone out if you need to. You’re not getting a binder full of instructions—you’re getting a walkthrough that actually makes sense.
After we’re done, you’ve got our number. System acts weird? Call us. Need to add doors later? We’ll handle it. That’s how this works when you’re dealing with people who’ve been doing this for over a century.
Ready to get started?
You get hardware that works. Readers, controllers, locks—whatever your doors need. You get software that lets you manage access from anywhere, whether that’s cloud-based or on your own server. You get integration with your existing security setup if you’ve already got cameras or alarms in place.
Rose Valley’s business landscape runs the spectrum—professional offices near Brookthorpe Hills, medical practices, property management companies handling multi-tenant buildings. The common thread? Everyone needs different levels of access for different people. Your front desk staff doesn’t need server room access. Your cleaning crew needs after-hours entry but not to your file cabinets. A good access control system handles that without making you think about it every day.
You also get real support. Not a call center in another state, but our team in Prospect Park who installed your system and knows exactly how it’s set up. When Delaware County businesses call us with access control issues, we typically respond within 30 to 60 minutes. That matters when you’ve got an employee locked out or a door that won’t secure.
The systems we install scale with you. Start with your front entrance. Add your back door next month. Tie in your gate system next year. You’re not locked into anything except equipment that actually works the way you need it to.
It depends entirely on what you’re securing and how many people need access. A single-door system with basic card readers starts around $1,500 to $3,000 including installation. That gets you the controller, reader, electric strike or magnetic lock, and basic software.
If you’re looking at multiple doors, different access levels for different employees, or integration with existing security cameras, you’re looking at more. A small office with three entry points and 20 employees might run $5,000 to $8,000. The cost goes up when you add features like mobile credentials, biometric readers, or more sophisticated management software.
Here’s what actually affects your price: the number of doors, the type of readers you want, whether we’re retrofitting old doors or working with new construction, and how complex your access rules need to be. We don’t quote over the phone because we’d be guessing. We come look at your building, ask about your needs, and give you a real number based on what you actually require.
You can absolutely manage it yourself. Modern access control systems are built for business owners and office managers, not IT departments. If you can use a smartphone, you can add a new employee, deactivate someone’s credentials, or pull a report showing who entered your building last Wednesday.
Cloud-based systems are especially straightforward. You log into a web portal or app, and everything’s laid out in plain English. Need to give your new hire access? Add their name, assign their credential, pick which doors they can use. Takes about two minutes. Someone leaves your company? Deactivate them immediately, from anywhere.
The only time you might want IT involvement is if you’re integrating with existing network infrastructure or running an on-premise server. But for most small to medium businesses in Rose Valley, the system we install is something you’ll manage yourself without thinking twice about it. We set it up, show you how it works, and you take it from there. You’re not calling us every time you need to make a change.
Your doors default to whatever position makes sense for that specific entry point. Most businesses set their systems so doors lock when power fails—you don’t want your building unsecured during an outage. But you can configure certain doors to unlock during power loss if that’s a safety requirement for your space.
The access control system itself usually has battery backup. When power cuts out, the controller keeps running on backup power for hours, sometimes days depending on the system. Your credentials still work. The system still logs entries. You just might not have network connectivity to manage it remotely until power returns.
If something actually breaks—a reader stops working, a door won’t unlock, whatever—that’s when you call us. We’re local to Delaware County and we respond fast. Most access control issues are simple: a loose wire, a credential that needs reprogramming, a reader that needs adjustment. We’ve been fixing security hardware for over 140 years. Your system going down doesn’t mean you’re locked out of your building for days. It means you make a phone call and we handle it.
A single door typically takes half a day. We’re mounting hardware, running wiring, installing the controller, setting up software, and testing everything. If your building’s already wired and we’re just upgrading old equipment, it might go faster. If we’re running new wire through finished walls, it takes longer.
Multiple doors obviously take more time. A three-door system might take a full day or a day and a half depending on your building layout and how far apart the entry points are. Larger installations with a dozen doors, multiple access levels, and integration with existing security systems could take several days.
We work around your schedule. If you can’t have us disrupting your business during operating hours, we’ll come early, stay late, or work weekends. Most Rose Valley businesses prefer we install during normal business hours so their team can see how everything works, but we’re flexible. The goal is getting your system up and running with minimal disruption to how you operate. We’re not leaving until every door works exactly the way it should and you know how to manage the whole system.
Probably, yes. Most modern access control systems integrate with existing CCTV systems, especially if your cameras are IP-based. The integration lets you do useful things like automatically pull up camera footage when someone badges in, or review video alongside your access logs to see exactly what happened at a specific door.
If you’ve got an older analog camera system, integration gets trickier but it’s usually still possible. We might need to add a network video recorder or use middleware software to connect everything. The question isn’t really whether it can work—it’s whether the integration cost makes sense for what you’re trying to accomplish.
We install and service both access control systems and CCTV, so we know how to make different manufacturers’ equipment talk to each other. When we come assess your building, bring up your existing cameras. We’ll tell you exactly what’s possible, what it’ll cost, and whether you’re better off upgrading your camera system at the same time. Sometimes the answer is yes, sometimes it’s not worth it yet. We’ll give you an honest assessment either way.
No. That’s the whole point of installing a scalable system from the start. You add controllers and readers as you need them. Your software already handles it. Your credentials already work. You’re just expanding what’s connected, not replacing what you’ve got.
Let’s say you install access control on your front entrance this year. Business grows, you lease additional space, now you want to secure a back door and a side gate. We add hardware for those entry points and connect them to your existing system. Your current employees’ credentials automatically work on the new doors once you assign permissions. Takes us a few hours to install, takes you a few clicks to configure.
The only time you’d need to replace components is if you massively outgrow your controller’s capacity—like you installed a system rated for four doors and now you need twenty. Even then, you’re usually replacing the controller and keeping everything else. This is why we ask about your plans during the initial assessment. If you’re likely to expand, we install a system with room to grow. Costs a bit more upfront, saves you a lot more later.
Local Resources
